Chantland BA Series Incline Transfer Conveyor
The BA Series is an incline conveyor for moving packages, boxes, and bags in high-capacity industrial, warehouse, and dockside applications. Available with either slider or roller bed construction, it features a power lift that easily raises or lowers the conveyor frame to the desired working angle. Standard belt speed is 65 feet per minute driven by a 1 to 5 HP worm drive depending on the conveyor length, which can range from 20 feet to 50 feet per your particular requirements. The welded steel angle iron frame with truss design is especially rugged. Swivel casters with locks make the BA Series easy to move and store. Models 30 feet and longer are equipped with outriggers to ensure extra stability and safety. Standard belt widths are 16 feet and 24 feet.
STANDARD FEATURES
- Available 20', 23', 26', 30', 35', 40' and 50' lengths
- 1 to 5 HP worm drive with totally enclosed, fan-cooled motor
- Drives mounted within the frame
- 65 ft per minute belt speed
- NEMA 12 electrical controls with start/stop/reverse pushbuttons
- Standard PVC rough-top belt in 16" and 24" widths
- Stainless steel mechanical lacing
- Powered lift for easy raising and lowering
- Discharge heights from 4'-0" to 36"-8" depending upon configuration
- Safety locks on lift shaft to prevent collapse
- Heavy swivel casters with floor locks
- Fold away outrigger stabilizer arms on units 30’ and longer
- Structural truss design frame construction
OPTIONS
- Belt widths and compositions designed per application
- Wash down, corrosion resistant, explosion proof electrical packages
- Cleat belt designs for steep inclines
- Fixed or adjustable side rails
- Power feeder
- Gravity feeder or discharge sections
- Roller bed design for heavier load applications
- Side boards
- Guard rails
- Raised base
UTILITY REQUIREMENTS
- Air: None
- Electrical: 230/460, 3-Phase, 60 HZ
Approximate Dimensional Drawing
