Made in the USA This product is made in the USA

The New London 500 Series incline, cleated belt supply conveyors are ideal for transporting loose unpacked items like plastic parts, nuts & bolts from a horizontal position up an incline. The 500 Series is available in widths up to 24” and inclines of 300, 450 or 600.

The Model 521 is a light duty conveyor designed to convey unboxed, loose products like plastic parts and stampings, and bulk products like sludge or sand. It features a low-profile infeed and small hold-down wheels for easy placement under existing machines.

The Model 590 is a medium duty conveyor used to convey large volumes of everything from metal scrap or parts to large volumes of nuts or bolts. This unit is also used to convey large volumes of bulk products like wet sludge or sand.

The Model 591 is a heavy drive shaft conveyor used to convey large volumes of everything from metal scrap or parts to large volumes of nuts or bolts. This unit is also used to convey large volumes of bulk products like wet sludge or sand.

Standard Features:

  • Widths: Up to 24″
  • 300, 450 or 600 inclines
  • Speed: 30 FPM
  • Motor:
    • 521 – 1/3 HP
    • 590/591 – 1/2 HP
  • Drive: top mount, right side
  • Drive Pulley:
    • 521 – 4″ dia.
    • 590/591 – 8” dia.
  • Infeed Pulley:
    • 521 – 4″ dia.
    • 590/591 – 8” dia.
  • Frame:
    • 521 – 6-5/8″ Deep x 12 Gauge
    • 590/590 – 12″ Deep x 10 Gauge
  • Side Rails: 1-1/2″ or 3-1/2″ High
  • Bearings: Grease Sealed
  • Belt: Black PVC 120
  • Cleats:
    • 521 – 1.5”
    • 590/591 – 3”

Options:

  • Corrugated Belt: Black PVC 120

Utility Requirements:

  • Air: None
  • Electrical: 230/460 VAC, 3 ph, 60 HZ  TEFC

Approximate Dimensional Drawing: