• Eliminates the need for manually hanging and holding bags, freeing the machine operator for more productive tasks

• Works with sewn open mouth multi-wall bags, flat tube poly (4 to 10 mil.), flat tube open mouth, gusseted sewn open mouth, pinch style bags, woven polypropylene bags, and more

• NO BAG, NO DUMP feature when used with an Inglett bagger. System will not discharge for any reason if the bag hanger fails to properly position a bag. Spillage and product loss are greatly reduced.

• Can be adjusted for various size bags in a matter of minutes. Both perimeter and bag length can be varied as required by the weight of the package.

• Speed can be synchronized with that of the bag filling machine

• Conveyor type magazine holds a generous supply of open mouth bags, permitting longer runs without replenishing bag stock. When more bags are needed, they can be added without stopping the operation.

• Speeds of over 20 bags per minute

STANDARD FEATURES

• Mild steel construction

• Epoxy painted

• Minimum floor space required

• Magazine capacity of up to 400 bags, conveyor must be a minimum of 12" from floor

OPTIONS

• Quick change, lock-on, internal expanding bag clamps available; comes standard with universal style clamp assembly which is adjustable to many bag sizes without changing clamps

• Right or left hand layout available to fit your space requirements

UTILITY REQUIREMENTS

Electrical:

Motors: 220V/440V, 3 PH, 60 Hz
Control: 110V, 1 PH, 60 Hz

Pneumatic:

Minimum of 25 CFM to bagger and bag hanger
Maximum pressure: 60 PSI

Additional air capacity of 20 CFM at 60 PSI is required if air vibrator is used on supply hopper

Two ½" air lines required from source to Bagger and Bag Hanger unit controls are NOT included

SHIPPING WEIGHT

U.S. destinations: 1250 pounds
Non-U.S. destinations: 1650 pounds