| | Inglett : Hanging, Filling & Closing System Model 3597
- Proven bag hanging technology
- Precise consistent bag filling
- Smaller plant footprint
- Low head room requirements allow for ease of application and service
- Speeds up to 20 bags per minute
- Fewer deformed bags
- Quicker bag changes
- Complete continuous bag top control
- NOTE: Testing may be required to determine obtainable speeds and accuracies on your product.
STANDARD FEATURES Easily adjust bag sizes with hand crank adjustments; "Motorized" also available - Exclusive rebag feature allows introduction of hand filled bags into line-up
Bags are handled by the top only. This significantly reduces bag deformation which results in fewer bag closing failures. - Gussett control and positive spout placement, maintain bag uniformity throughout the filling process
- Bag jogging conveyor squares the bottom of the bag to help prevent bag closing failures. Servo Motors "Decelerate" the filled bags from 350 FPM to 65 FPM
OPTIONS Tag Placer automatically applies multiple tags to each bag. (Picture above is shown from above) Paper/Poly/Polywoven upgrade available Special Anti-Corrosion Package with Stainless Steel 304 shafts, fittings, enclosures, adjusting screws, and lift chains plastic air and sealtite fittings Tagger infeed belt assembly Special paint colors available
UTILITY REQUIREMENTS Pneumatic: Hanger Air Requirements
45 SCFM @ 60 PSI Scale Air Requirements
6 CFM @ 60 PSI (constant) Electrical: Control Circuit: 115V, 1PH, 60Hz
Power Circuit: 460V, 3PH, 60Hz Power Drops & Amperage Scale: 115V, 15 amp
Inline Bagger: 206V, 40 amp
Tagger: 115V, 15 amp
NOTES Bagger control box mounted remote on floor stand with 25 feet of lead-in cable Overall width 84 ˝ " to center of legs 7" of freeboard required
|
