Inpak Systems - Product Lines

Taylor Products : IBC-3000 Modular Jumbo Packer

100 lbs to 3,000 lbs

ADAPTABILITY FOR PRODUCT VARIATION
The outer spout of the modular jumbo packer has an inflatable rubber boot with a valve and closure seal regulator. A single action or dual-action knife gate inlet valve may be added to control inlet flow. Densification and de-airation options are available.

ATTACHMENTS FOR BOX/DRUM FILLING

A down spout with dust cover and vent is available for box filling. Drum can be filled using an articulating arm with flexible spout. The moveable platform option is ideal for both drum and box applications.

ELECTRONIC OPTIONS FOR EVERY APPLICATION

The IBC3000 can be fitted with Taylor Products' exclusive electronic weigh system with three load cells in an equilateral triangular configuration. Auto zero, BCD, Weigh-Trac, printers and computer interface options are available.

MODULAR DESIGN FOR FLEXIBILITY

The basic unit is a compact 68" wide by 52" deep and 102" tall. A single operator on floor can reach the bag hooks and all controls within one step. The IBC3000 starts as a complete, simple filling stand with just 60 psi air requirements.

SELECT THE COMBINATION OF FEATURES FOR YOUR SPECIFIC APPLICATION

Constructed of heavy duty tubular steel, the IBC3000 is designed for 60" bag lengths and up to 3,000 lb. Bag weights. By selecting from the available options, the packer can be adapted to a wide range of specific semi-bulk packaging operations.

VARIED INLET OPTIONS

The 6" round inlet hole is offset to the front to protect the operator and accommodate fork trucks. An open-close 6" knife valve or a three position inlet valve can be added.

ELECTRONIC CONTROLS

Taylor Products' electronic weigh control includes LED readout, two set points for extreme accuracy on bulk and dribble fill. Superior to any other system.

BAG LINER INFLATER OPTION

Taylor Products offers two types of bag inflaters to stretch, straighten and conform the liner. With blower or for customer furnished air.

VIBRATION ENHANCED BY PLATFORM

Large impact cylinders can be built into the movable platform of the IBC3000 to transfer more energy to the product and speed settling.

ARTICULATING ARM ATTACHMENT

For multiple drum applications, an articulating arm with flexible spout is available to position the fill valve over each drum.

PLATFORM SUSPENDED ON WEIGH TABLE

The table can be programmed to stay down during the bag fill cycle, and lifted to square the bottom of the bag. At full weight, platform lifts to a preset height so straps can be released.

FULL CONVEYOR/PALLET SYSTEM

The IBC3000 can be linked with an automatic pallet dispenser to send empty pallets to the platform for loading. Holds eight or more pallets. Bag squaring unit has fixed sidewalls with front and back air cylinder operated doors. Closed, they form the bag as it is filled. Available with vibration option only. A filled pallet takeaway conveyor is available. Powered by a TEFC gear motor, the conveyor can accumulate up to four pallets. Three phase electrical requirement with conveyor option.

DIMENSIONS AND SPECIFICATIONS

Height can be adjusted ± 6".
Bag sizes should be selected according to filling/squaring requirements. Consult Taylor Products for assistance.
Specify pass-through or back-loading design.
Electrical requirements: 115v single phase.
Air requirements: 60 psi
Shipping weight: 1,500 lbs.

SYSTEMS INTEGRATION