Model 4190 Weighmaster Auger Bagger

• Heavy duty gross weigh auger bagger for filling valve-type bags with dry-flaked powdered, pelleted, or granular materials

• Standard units include models with load cells and electronic controls (as shown in picture), or with scale beam

• Speeds up to six 50# bags per minute

• Accuracies of +/- ¼ of 1% on load cell models or +/- ½ of 1% on scale beam models are obtainable with good product flow and consistent bulk density

• 20# to 110# weight range on bags and 50# to 220# weight range on drums

• Available with T304 stainless steel with food grade welding and polish (when required) on all contact surfaces

• NOTE: Testing may be required to determine obtainable speeds and accuracies on your product.

• CONSTRUCTION: Welded tubular steel frame, mild steel contacting surfaces, one coat industrial primer, one coat enamel paint

• MANUALLY operated bag clamps

• MECHANICAL TILTING bag chair

• MOTOR: 5 H.P. TEFC Special Duty designed for frequent starts

• NEMA 12 electrical controls

• OSHA TYPE clean out door

• SCALE BEAM weighing on pivoted hardened knife edges

• AIR OPERATED bag clamps

• AUTO AIR OPERATED bag discharge chair

• AUTOMATIC start actuator

• CONSTRUCTION: T304 Stainless Steel on contacting surfaces

• DRUM FILLING attachment and cradle

• FEEDER RIBBON or SPIKED AGITATOR in primary hopper for sluggish materials

• FOOD GRADE construction with No. 4B polish

• HARD FACED AUGER (Stellite) for abrasive materials

• HIGHLY CORROSIVE atmosphere package with anodized cylinders, phenolic bushings, stainless steel fasteners, PVC plastic fittings

• NEMA 4 Electrical Controls (water tight)

• STAINLESS STEEL paint

Pneumatic: 12 CFM @ 80 PSI-Max
Electrical: 220/440V, 3PH, 60Hz

4'W X 6'L X 6'H

1100 POUNDS