Model 4198 Weighmaster II Auger Bagger

• Heavy duty gross weigh auger bagger for filling open-mouth bags, drums, and boxes with dry-flaked powdered, pelleted, or granular materials

• Standard units include models with load cells and electronic controls or with scale beam

• Speeds of four to six bags per minute

• Accuracies of +/- ¼ of 1% on load cell models or +/- ½ of 1% on scale beam models are obtainable with good product flow and consistent bulk density

• 20# to 110# weight range on bags and 50# to 220# weight range on drums

• Available with T304 stainless steel with food grade welding and polish (when required) on all contact surfaces

• NOTE: Testing may be required to determine obtainable speeds and accuracies on your product.

• AIR OPERATED bag clamps with no-bag, no-dump interlock

• CONSTRUCTION: Heavy gauge carbon steel, mild steel contacting surfaces, one coat industrial primer, one coat enamel paint

• DUST COLLECTOR connection

• MOTOR: 5 H.P. TEFC - 1750 RPM designed for frequent starts

• NEMA 12 electrical controls

• OSHA TYPE clean out door

• SCALE BEAM weighing on pivoted hardened knife edges with sensing switch cut-off

• 3 A Dairy grade package

• CONSTRUCTION: T304 Stainless Steel on contacting surfaces

• DE-AERATION PROBES designed to take excess air out of floody, fluid products to help ease bag closing and sealing

• DRUM HOLDING cradle attachment

• FEEDER RIBBON or SPIKED AGITATOR in primary hopper for sluggish materials

• FOOD GRADE construction with No. 4B polish and includes drain plug and air purge packing gland

• HARD FACED AUGER (Stellite) for abrasive materials

• LOAD CELL weighing with two stage digital controller

• NEMA 4 Electrical Controls (water tight)

• PAINT: White urethane or stainless steel

• TWO STAGE bulk and dribble feed for increased accuracies

Electrical: 220/440V, 3PH, 60Hz

4'W X 6'L X 6'H

1020 POUNDS