Model 4196 Weighmaster JR Auger Bagger

• Heavy duty gross weigh auger bagger for filling small open-mouth bags or containers with fine powders, small pelleted, or granular materials

• Standard units include models with scale beam weighing (as shown in picture), and with load cell weighing

• Extremely good dust control

• Speeds of up to five 10# bags per minute

• Accuracies of +/- ¼ of 1% on load cell models or +/- ½ of 1% on scale beam models are obtainable with good product flow and consistent bulk density

• 1# to 50# weight range

• Available with T304 stainless steel with food grade welding and polish (when required) on all contact surfaces

• Easy to install, operate, and adjust

• NOTE: Testing may be required to determine obtainable speeds and accuracies on your product.

• CONSTRUCTION: Mild steel structure for frame and contacting surfaces. One coat industrial primer and one coat enamel paint.

• MANUALLY operated bag clamps

• MECHANICAL TILTING bag chair

• MOTOR: 5 H.P. TEFC special duty design for frequent starts

• NEMA 12 electrical controls

• AIR OPERATED bag discharge chair

• AUTOMATIC bag start actuator

• CONSTRUCTION: T304 stainless steel on contacting surfaces

• FEEDER RIBBON or SPIKED AGITATOR for sluggish material

• FOOD GRADE construction with No. 4B polish

• HARD FACED AUGER (Stellite) for abrasive materials

• NEMA 4 Electrical Controls (water tight)

• PAINT: Stainless steel

Electrical: 220/440V, 3PH, 60Hz
Pneumatic: 1.5 CFM @ 80 PSI Max

4'W X 6'L X 6'H

1200 POUNDS