Home - Thread & Tape - Tag Placers - Fischbein Model 3920-ST Single Tag Placer -

Fischbein Model 3920-ST Single Tag Placer

Made in the USAMade in the USA

Designed to operate in conjunction with a Fischbein bag sewing system, the self-contained Model 3920-ST Single Tag Placer System will accurately position a single product information tag either on the front or backside of a bag as it's being sewn shut, at speeds up to 20 tag placements per minute depending on operational parameters, product type, and bag material1. The efficient bottom-fed tag magazine and technologically advanced PLC controller allow for continuous operation and accommodate nonporous tags measuring from 3.75" to 5.75" wide x 5.50" to 12.50" long2. Steel construction and high-gloss corrosion resistant enamel paint stand up to challenging environments. Features self-contained vacuum system and missed tag alarm. Available for right-or left-hand installation. Measures 34"W x 74"H x 41"D.

 

Standard Features:

  •          Mils steel construction
  •          High-gloss corrosion resistant enamel paint finish
  •          Bottom-fed dual tag magazine for continuous feeding
  •          Tag stripper for positive tag positioning
  •          Left or right handed installation
  •          PLC controller
  •          NEMA 12 dust-tight electric
  •          Missed tag alarm

1Testing might be required to determine obtainable speeds for your application.

2Tag samples must be submitted in advance of ordering to ensure compatibility. Accommodates nonporous tags only.

 

Utility Requirements:

  •       Air: 80 PSI @12 SCFM
  •       Electrical: 120 VAC, 1-Phase, 60 HZ

 

Aproximate Dimensional Drawing:

Coming Soon