The ARPAC PAC Series is a fully automated, conveyorized, pallet stretch wrapper.
The PAC automatically indexes pallets into the wrapping zone without operator assistance. Pallets are stretched wrapped with pre-stretched shrink film. A top palten device can be used to hold down unstable pallet loads during the wrapping sequence and an optional top sheet dispenser can cover the top of the pallet with film for additional product protection from moisture.
At the end of the wrapping cycle, the wipe arm captures the film, cuts the film and the wipes the film onto the load to prevent film tails from unraveling. The wrapped pallet is then conveyed out of the wrap zone making way for the next pallet.
The PAC is made in the USA and constructed with heavy-duty reinforced structural steel with non-corrosive baked on powder coat finish.
STANDARD FEATURES:
- 48″x48″x65″ max load size
- 5’x52″ 35 FPM infeed conveyor
- 5’x52″ 35 FPM exit conveyor
- 79″ variable speed, chain drive turntable
- 65″ wrap height (std.)
- 20″ film w/300% pre-stretch
- 4,000 lb. capacity
- Allen Bradley controller
- safety fencing
- NEMA 12 enclosure
OPTIONS:
- fork lift sensor
- extended tower height
- UL certification
- top sheet dispenser
- 20 FPM to 60 FPM conveyor speed
- conveyor inline scale
UTILITIES:
Air: 80PSI @ 3 CFM
Electrical: 230VAC, 3 Ph, 60 Hz
DIMENSIONAL DRAWING
