The ARPAC Pro-Series is a semi-automated, pre-stretch film, pallet wrapper. The Pro-Series is available in a high profile model for fork lift loading and low profile model for pallet-jack loading.

With a 4,000 lb. (std.) capacity, the Pro-Series is available with a number of options (i.e. extended towers, split frames for wide loads & access ramps) that can accommodate a wide variety of pallet loads. A scale with printer can be added to the Pro-Series.

Standard Features:

  • 4, 000 lb. capacity (std.)
  • 74″ max. load height – high profile
  • 81” max. load height – low profile
  • 60″ diameter turntable – low-profile (std.)
  • 50″ square turntable – high-profile (std.)
  • 150 to 300% film pre-stretch EZ-Load® film pre-stretch dispenser for 20″ film rolls
  • variable turntable rotation speed up to 12 RPM
  • variable carriage speed up to 21 FPM
  • automatic load height sensing
  • automatic top film over wrap control
  • electronic film tension adjustment control
  • Allen-Bradley® MicroLogix™ PLC controller
  • UL/CSA approved components
  • powder coated steel construction
  • 1/2 HP, 90 VDC motor


  • Extended film tower for wrapping taller loads
  • Top platen device to stabilize tall or light unstable loads
  • Access ramps to assist loading of pallet
  • Automatic film tear device (AFTD) tears film at end of the cycle
  • Split-frame construction to increase clearance for oversized loads
  • Cycle counter to count the pallets wrapped
  • Extended umbilical cords for split-frame models Integrated scale and printer

Utility Requirements:

  • Air: None
  • Electrical: 120 VAC, 1 Ph, 60 Hz, 10 A, 1.2 kW

Approximate Dimensional Drawing: