Made in the USA This product is made in the USA

The AP2600 is a fully automated, gross weigh, auger-filler bagging system for open mouth, plastic & poly woven gusseted bags. The AP2600 includes: a bag placer/positioner, an auger filling scale and a PILS (pinch inner liner sealer) bag sealer. The AP2600 can be built in a single station (up to 420 bags/hour) or two station configuration (up to 660 bags/hour). It can also be built to withstand water wash-down by utilizing stainless steel frame components

Operation:
The AP2600 picks up the bag from a flat stack and positions it on the fill spout. Clamps hold the bag in place while it is filled. Upon reaching the programmed weigh the clamps release the bag and it travels by conveyor through a PILS bag sealer.

Standard Features:

  • up to (11) 50 lb. or (9) 100 lb. bags/min.
  • 13” – 20” bag width
  • up to 40” bag length
  • NEMA 12 electronics
  • powder coated mild steel frame
  • adjustable for bag sizes
  • stainless steel product contact surfaces
  • empty bag conveyor
  • flat bag stacking magazine

Options:

  • stainless steel frame
  • food grade powder coated finish

Utility Requirements:

  • Air: 15 CFM @ 60-80 PSI
  • Electrical: as required

Approximate Dimensional Drawing: