Case erectors automatically open and erect flattened cases, fold the bottom flaps, and tape the bottom closed. Automated case erectors have magazine that can hold up to 100 flat boxes. Case packing stations receive the erected boxes and hold them in position to be filled with products.
Case erectors can easily handle your RSC and HSC cardboard boxes. If you’re not sure what type of case you have, visit Common Types of Corrugated Boxes.
Find Out More About Our Case Erector Machines
For more information about a specific case erector or packing station, be sure to contact us right here at Inpak Systems. Our packaging systems experts would be happy to help find the right case erector for you. You can also learn more details about each of our machines and their specific features by clicking on one of them below, or by checking out our video playlist on YouTube.
Case Erector FAQs
Our case erectors use vacuum suction cups.
Tape systems are cheaper & simpler to maintain. Hot melt glue systems produce a more rigid, square box.
Typical case erectors have an 100 case magazine.
Vertical erectors open the box upright, which takes up less space. Horizontal erectors open the box flat before flipping it, which can be gentler on larger boxes.
Every case erector has specific limits. Operators need to verify their peak production is within the erector specifications.
Every case erector has specific limits. Operators need to verify that their smallest and largest box will fit within the machine’s specifications.
Most basic tape erectors run on 110VAC,1-phase power. High-speed or hot melt glue machines often require 220V/460V 3-phase power. Compressed air may be required for flap folders.
Emergency stop buttons, clear polycarbonate guarding, and automatic motor shutoffs.
Yes, some case erectors can be integration within inline systems.
Yes, installation, training, and/or service contracts are available from the manufacture.
The warranty period is established by the manufacturer and is typically 12 mos.