Poly bag drop sealers are manual bag fillers with a jaw sealer. The operator fills an open bag with a product and then seals the bag. Depending on the application, the sealed bag can be dropped in a box or on to a conveyor. There are two types of poly bag drop sealers.
Bag-On-A-Roll Sealers
Bag-on-a-roll sealers where the product (e.g., parts, candies, kits) is dropped into an open bag, sealed and cut off.
Slide Sealers
Slide sealers that use wicketed bags where a flat products (e.g. clothing, printed material) are slid into the bag and the bag is sealed and trimmed.
Find Out More About Our Drop Sealers
For more information about a specific drop sealer, be sure to contact us right here at Inpak Systems. Our packaging systems experts would be happy to help find the right drop sealer for you. You can also learn more details about each of our machines and their specific features by clicking on one of them below.
Drop Sealers FAQs
Depending on the operator and product, typically 25-75 bags/min can be filled & sealed.
Every drop sealer has bag size limits. Operators need to verify their largest product will fit within the machine’s bag specifications
Impulse is preferred because they consume less energy and are safer, while constant heat is required for thick laminate or foil bags.
Every drop sealer has limits. Operators need to verify weight of heaviest product within the machine’s specifications.
Yes, once the bag is filled & dropped it is automatically sealed & trimmed.
Yes, depending on the model, optional printers are available.
Most drop sealers run on 110VAC,1-phase power. Typically, 80 PSI continuous compressed air is required.
We offer drop sealers from APM, Sharp Packaging, & Weigh Rite.
Yes, installation, training, and/or service contracts are available from the manufacture.
The warranty period is established by the manufacturer and is typically 12 mos.