Made in the USA This product is made in the USA

The Rapat Model HDB-K is a bag kicker that transitions bags from a vertical, top-up position to a horizontal, bottom-first position on to a 2nd conveyor that is set 900 (R or L) to the 1st conveyor. The standard HDB-K is 4’ long with a 12” wide belt and capable belt speeds up to of 40 FPM.

Standard Features:

  • Fully adjustable hardware to accommodate different bag sizes
  • Stainless steel bag slide for smooth transition from upright position
  • Turn wheel to assist bag realignment
  • V-guide molded to underside of belt for positive tracking
  • Lagged drive pulley for maximum belt traction.
  • NEMA 12 electrical enclosure with pushbuttons and safety lockout
  • Structural channel frame with heavy formed steel bed
  • Industrial enamel finish
  • 22″ wide 4-ply slip-top belt
  • 4′-0″ overall length


  • Lengths to meet specific applications
  • Wider units for specific applications
  • Variable speed controls
  • Washdown, corrosive, and explosion-proof electrical packages
  • Special finish coatings
  • Adjustable height supports (12″ to 20″ top of belt)
  • Vertical lift (manual or powered)
  • Casters with brakes
  • Slave-driven unit
  • Less bag-turning hardware for use as infeed to flattener conveyor

1Testing might be required to determine obtainable speeds and accuracy for your application.

Utility Requirements:

  • Air: 7 CFM @ 80 PSI
  • Electrical: 220/440VAC, 3-PH, 60HZ

Approximate Dimensional Drawing:

Coming Soon